![]() |
|
|
|
#1
|
||||
|
||||
|
Yes...check power supply voltages first...and look for bulged caps.
__________________
Let me live in the house beside the road and be a friend to man. |
|
#2
|
|||
|
|||
|
Quote:
![]() YamahaFreak: I also forgot to mention, check the obvious, like fuses... The main AC input fuse must be good to be getting the red light but there are usually at least a couple small surface mount ones on the logic board. Speaking of the logic board, Samsungs usually have a green LED on them. What is yours doing? It should sit there and flash with a period of about once per second if everything is normal. The problem with this one here turned out to be a couple of shorted FETs (actually IGBTs, but whatever) on the Y-Main board... I'll have to order some from Digikey tomorrow since they are fancy super-high-current (220A), high speed switchers specifically designed for use in pulse applications in PDPs (like the ERC) so none of the usual stuff I have laying around is going to come even close to surviving in that circuit. |
|
#3
|
|||
|
|||
|
Quote:
|
|
#4
|
||||
|
||||
|
A 2013 set could very well have bulged (damaged) caps. Last year I replaced several caps in a 6 month old Sony DVD player.
__________________
Let me live in the house beside the road and be a friend to man. |
|
#5
|
||||
|
||||
|
Well, unless there is a cost-effective, non-warranty method of getting a replacement plasma panel, this set's toast. The owner's dog knocked it over and cracked the screen!
__________________
Sony Trinitron Fan |
| Audiokarma |
![]() |
| Thread Tools | |
| Display Modes | |
|
|