![]() |
|
|
|
#1
|
|||
|
|||
|
there is an RCA patent out there as well looks like what is used by the CTC-17 (single NPN transistor) except the B+ is listed as 405v while the CTC-17 uses the voltage drop across the supressor resistor on the horz out to supply 27v.
http://www.google.com/patents/US3436475 I wonder if this would help with some of the Macro vison lines seen on some early RCA and clones. |
|
#2
|
|||
|
|||
|
Hah. Always wondered what that transistor in the CTC-17 did specifically, but never had occasion to find out.
|
|
#3
|
|||
|
|||
|
a little more digging, it was ONLY on the CTC-17X (I checked my sams for the CTC-17 I had which was not an X and could not find it).
My plan it to try at least the 1st blanking (two pulse method) since the CTC-12 I have does not have a nice 27v supply (the supressor grid is connected to the cathode inside the tube, both to ground) on the CTC-12. Besides it looks a lot easier. My Sylvania RCA clone roundie may have used a 6JE6, and would be a good candidate for the transistor, esp to see if it could clear the macro vision (seen clearly in one of my early videos on You tube). |
![]() |
| Thread Tools | |
| Display Modes | |
|
|