![]() |
|
|
|
#1
|
||||
|
||||
|
Quote:
That will force you to make a the wheel larger than it otherwise would have been. Unless you make the wheel huge, I don't see why mounting a light plastic lens would be any less safe than a CBS color wheel. The CBS wheel (with 6 sectors) ran 1440 rpm, in the 24 fps 6 interlace system. At 15 fps per second, a Nipkow disc will only turn 900 rpm, and half that if it were interlaced with two spirals that were offset by one-half line width. James Last edited by earlyfilm; 10-29-2014 at 12:43 PM. Reason: Shortened quote |
|
#2
|
||||
|
||||
|
I haven't purchased any lenses yet. I've been looking on eBay and http://www.surplusshed.com/lens.cfm Cost is a major concern. Surplus shed has better specs on the lens but they are $3.50 apiece with a minimum of 10 lens. Multiply by 45 lens then more then I originally wanted to spend. The ones on eBay are under $15 for 50 lens but nothing stated about focal length just the size of the lens.
From the ETF site http://www.earlytelevision.org/weste...storation.html "The scanning disc used with the new motor was aluminum and about 8 inches in diameter. Forty five lenses about I cm. in diameter and having a focal-length of 1 inch were arranged in three interlaced spirals. It was important that the optical centers of the lenses be accurately located to provide a uniform scanning field without dark lines." |
![]() |
| Thread Tools | |
| Display Modes | |
|
|