Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #19  
Old 10-27-2014, 03:13 AM
MIPS's Avatar
MIPS MIPS is offline
VideoKarma Member
 
Join Date: Jun 2014
Location: West Canadia
Posts: 1,023
Tried asking around at shops here in town and Vancouver and everyone was a little stumped. Best recommendation I got was to swap out the 6CU6 and 12BH7A. Found that one of my 6CU6's had gone south. Unfortunately in doing so no real change happened so I went back to fiddling with the controls. At this point I discovered that if I looked closely and twisted the width control from end to end there was something like 8mm of movement so it's less that the width is not working at all but more that it's really weak.
Further testing quickly halted when I cranked the vertical linearity and C-434 burst into flame. Looks like an arc popped through the casing and went into the ground clip that it was resting against. Set still seems to behave but I'll have to swap the disc cap out anyways.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:11 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.