Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #12  
Old 10-21-2014, 10:38 AM
NoPegs's Avatar
NoPegs NoPegs is offline
The glass is -3dB.
 
Join Date: Mar 2014
Location: Amish Country PA.
Posts: 376
Quote:
Originally Posted by Username1 View Post
Remove plate cap, or be very careful and wear good insulating gloves.

If you absolutely have to run it with no picture tube attached, and I can't think of
any reason where that is the only option, I would attache the HV wire to a hv probe
like a voltage probe, and tape it off and put it inside a bicycle tube or similar rubber
protection boot.
That way you have a load of some kind, you don't want that voltage spike
reflecting back onto the primary of the HVT.

.

.
Bicycle tubes are conductive. Well, at 10kV and up they're not good at insulating, under 250v they're fine. Just letting everyone know.

Concrete is conductive too!
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:11 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.