Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 10-18-2014, 05:30 AM
cwmoser's Avatar
cwmoser cwmoser is offline
VideoKarma Member
 
Join Date: Dec 2009
Posts: 552
Hey Steve, did you Ohm out the Flyback?
Does your Schematic show ohm values for each coil winding in the Flyback?

I would check each winding, and then make sure that each coil winding is connected
properly.

Also verify that the high voltage capacitor is in place.

Be very careful around that Flyback and make sure you remove power and discharge the CRT before working in there.

Carl
__________________
CW
1950 Zenith Porthole - "Lincoln"
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:10 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.