![]() |
|
|
|
#1
|
|||
|
|||
|
I get that, I am wanting to know what the going rate for a set like that might be on average.
Gregb |
|
#2
|
||||
|
||||
|
I can tell you that one of these sold last year for $10k and one sold the year before at auction for half that. Like Richard said it all depends who's "in the room." Go ask a random person what an old tube TV that doesn't work is worth, then ask a billionaire TV executive and avid prewar TV collector who doesn't yet own this model the same question.
__________________
John |
|
#3
|
||||
|
||||
|
This one also appears to be a bit of a mess. Cabinet drilled for volume control, wrong power transformer that required extra holes be drilled in the chassis, 6F8's rewired to 6SN7's, wrong crt shield and mask and various stuff drilled and added to the chassis.
I did like his comment "It even has the original tuner shield/cover that so many of these sets are missing." Yes, these are always missing since that's not an original piece to these sets! |
|
#4
|
||||
|
||||
|
Quote:
Last edited by decojoe67; 10-16-2014 at 04:56 PM. |
|
#5
|
||||
|
||||
|
Was the newer power transformer added to accommodate the extra amps the audio chassis would draw?
|
| Audiokarma |
|
#6
|
||||
|
||||
|
Quote:
Quote:
Quote:
I'm not trying to tear this set down, just point out that they have come up for sale very regularly over the years, many times in much better condition, many times in worse, so it's up to the buyer to decide if this is the set for them. |
|
#7
|
||||
|
||||
|
I agree it is pretty well modded, and that somewhat hurts the vintage value--BUT it has NOT been butchered. And it looks pretty good on the front and sides.
For a serious collector who had the means--probably 3500-5K would be more fair. It IS a pre-war set-after all, with a claimed good tube, with line powered HV and a 5" electrostatic tube. |
|
#8
|
||||
|
||||
|
Really??? What do you think would be the motivation to make a shield like that?
__________________
John |
|
#9
|
||||
|
||||
|
At first glance I thought the audio amp chassis was attached to it , but a better look proved I was mistaken . The GOAT tube shields sure look wrong with the 6SN7s in place of the 6F8s
Last edited by init4fun; 10-16-2014 at 08:03 PM. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|