Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 10-11-2014, 10:57 AM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
A few more hints that may help........
Most sets number the parts in blocks example
hoz 500 series
vert 400 series
IF 100 series
so you can ID what circuit they are in example is T501 is in hoz &
is usually the horz drive transformer ETC.

Looking at photo rear to front looks like
Flyback ( FBT)
Horz output transistor ( HOT ) on heat sink
Hoz drive transformer, pin & yoke components.
Vert out IC on sink
Power supply is to the left, switching transformer then
in front the switching FET or transistor on sink.
In front of vert IC looks like audio out IC on sink.

To service unplug yoke, speakers, degaus coil, loosen
wire ties & flip over chassis. Now you can see everything & the
solder will flow nicely !

Have fun, wish I were there to work on it !

73 Zeno
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:05 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.