Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 10-10-2014, 09:54 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
I assume that CRT's (rectangle color 23v 25A 25X) seem to come in two flavors of implosion protection.

Bonded face or Tension band no face.

I see the common fix to bonding that is broken down is to remove the lens, and the bonding agent and re attach the lens around the perimeter, effectively removing the lamination which I assume is where the implosion protection comes from.

I have seen rebuilt CRT's with ONLY the band (and not the formed steel hardware that is often seen on this era CRT). I assume these rebuilts started as bonded and part of the rebuild was to use a band (no other steel frame). I do not know this as a fact but I think scotty used to rebuild rectangle and remove the lens and bonding agent and install only the steel band on his rebuilds.

I have seen rebuilts that also had a bonded face (the channel masters in the foam boxes), which I presume had been rebuilt with guns AND rebonded (but are failing again).

This is why I am hoping someone that actually did this for a leaving (rebuild crt's) like Scotty may address. I am in no hurry to do it with out hearing from someone that has done this professionally.

I would be all for rebonding if I knew how this was done, not sure of the bonding agent or if special equipment is used to install.

Of course could just do like many others and just remove the lens and reattach with no bonding many have done with no reports of spontaneous implosion.

Last edited by DaveWM; 10-10-2014 at 09:58 PM.
Reply With Quote
  #2  
Old 10-10-2014, 10:25 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,814
Quote:
Originally Posted by DaveWM View Post
...I think scotty used to rebuild rectangle and remove the lens and bonding agent and install only the steel band on his rebuilds.
I agree it would be nice to have this verified. In the case of roundies posted here, after the faceplate bonding is removed it is not replaced, and no attempt is made to band the tube either. The protective plate may then be mounted spaced from the tube face by a tape gasket. It is questionable whether the bonded cover provided any strength increase, or just protected the face from a concentrated blow.

On the other hand, we have had examples posted here of Motorola rectangular bonded tubes not taking well to faceplate removal, so in some cases it may actually provide significant added strength.

Inquiring minds would like to know!
Reply With Quote
  #3  
Old 10-11-2014, 09:27 AM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
I have never seen a banded roundie so I assume its not a good idea on them.

I did have a CRT go off on me in the process of removing a lens (un banded bonded lens RCA type with the very hard bonding agent). I was lucky that happened when I had my back to it in the process. Since then I have been more actively trying to find out the best thing to do.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:30 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.