Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 10-04-2014, 07:44 PM
Sandy G's Avatar
Sandy G Sandy G is offline
Spiteful Old Cuss
 
Join Date: May 2003
Location: Rogersville, Tennessee
Posts: 9,571
Quote:
Originally Posted by miniman82 View Post
So I had to take one of my parrots to the vet the other day because it was having an issue with its left eye, and on my way out of the parking lot I saw a pawn shop. I never drive by them without going in, on the off chance they might have something I want. Usually doesn't amount to anything, but this time I might have scored.



Sitting on the shelf was a 621TS, he wanted $1,200 for it. Knowing that was too much without knowing the condition of the chassis and tube, I asked the owner if there was any wiggle room on the price. He shot back $900, so I went back home to grab the CR-70/variac/meter. 7DP4 tests good, and actually came up pretty fast. Not sure if I was using the universal adapter the right way, but it did need the bias switch set to -36 in order to get decent cutoff. Need input on that, not sure if it's normal.

Anyhow, the cabinet needs refinished but there's no peeling veneer that I could see. Top is cracked in half, but could easily be repaired. No back, but they make repops. Put the variac on it and after reconnecting the wires to the horizontal coil in the cage which had been cut off for some reason, HV started to spool up so I know horizontal is good. Plenty of hum from the speaker, so obviously the caps need replaced.

So the question becomes: is $900 too much for a 621TS in need of cabinet love, but having a good CRT and restorable chassis? Need to move on this if so, before someone grabs it.
I am SURE in Norfolk/Newport News/Va Beach there would be a furniture refinisher who could do that up right.. You MAY wait 10 yrs to see another one, or if you have MY luck, get this one, & 3 more will show up in the next 2 months... It NEVER fails... (grin)
__________________
Benevolent Despot
Reply With Quote
  #2  
Old 10-05-2014, 03:31 PM
kramden66 kramden66 is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: Rockaway, NJ
Posts: 1,421
i see that one ended at 330 something with reserve not met .
the more i think about it the more i say go for the one near you , to get him to come down you could print out the ones on ebay , the ones Eric H put up , show him they are in better shape , one went for 775 , one for 623 , one in great shape for 885 , the one that didn't sell , if you can get him to come down because of condition , even if it is to 800 i don;t see why he wont do it , 850 ?
mike
Reply With Quote
  #3  
Old 10-05-2014, 06:48 PM
decojoe67's Avatar
decojoe67 decojoe67 is offline
VideoKarma Member
 
Join Date: Apr 2011
Location: Long Island, NY
Posts: 1,322
In the '90's, nice examples hit the $1,000 mark. They then peaked at about $2,000 with at least one, I personally can recall, selling for $2,500! Then their value slid back in to the $500-$800 range. That was for very nice, complete examples. The one in question is pretty rough. You need a back, fabrication of the front clip brass insert, knob insert, a complete refinish/repair, and decals. In my opinion, in today's market, I'd say $450-$550 tops for it.
Now, if you REALLY want it, it's worth whatever you value it, and what you can acquire it for.
Good luck.
PS - As far as the recent $7,000 "sale", I would totally ignore it given the reputation of the seller.

Last edited by decojoe67; 10-05-2014 at 08:30 PM.
Reply With Quote
  #4  
Old 10-08-2014, 04:04 AM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,857
Quote:
Originally Posted by Sandy G View Post
I am SURE in Norfolk/Newport News/Va Beach there would be a furniture refinisher who could do that up right.. You MAY wait 10 yrs to see another one, or if you have MY luck, get this one, & 3 more will show up in the next 2 months... It NEVER fails... (grin)
If he is still in business, the furniture refinishing guy on Virginia Beach Boulevard as it passes under the Laskin Road feeder - he could surely do some wonders! I was stationed at NAS Oceana, and loved seeing his work as I passed by. He's about a quarter mile westbound, from First Colonial Road, on the right, just before the overpass. The man worked miracles.



EDIT: Well, crap. Google Map shows a boarded up building, and three no trespassing signs. sigh...

Cheers,
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!

Last edited by Findm-Keepm; 10-08-2014 at 04:11 AM.
Reply With Quote
  #5  
Old 10-10-2014, 08:58 PM
M3-SRT8's Avatar
M3-SRT8 M3-SRT8 is offline
VideoKarma Member
 
Join Date: Oct 2007
Location: Worcester, Mass
Posts: 652
Remember. 721TS's makes a great parts chassis for a 621.
Reply With Quote
Audiokarma
  #6  
Old 10-10-2014, 11:12 PM
Steve D.'s Avatar
Steve D. Steve D. is offline
VideoKarma Member
 
Join Date: Sep 2002
Location: Hollywood Hills, Ca.
Posts: 1,792
Hey Nick,

Just wondering if you have come to a decision on the 621? I know when something like that find gets into your head, it stays there. I personally think it's a bit pricy, but if your budget can stand the strain, what the hell, go for it.
I hate those coulda, shoulda moments after the fact.


-Steve D.
__________________
Please visit my CT-100, CTC-5, vintage color tv site:
http://www.wtv-zone.com/Stevetek/
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:37 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.