Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Television Foundation CRT Rebuilding Project

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 10-04-2014, 05:55 AM
Steve McVoy's Avatar
Steve McVoy Steve McVoy is offline
VideoKarma Member
 
Join Date: Oct 2002
Location: Columbus, Ohio
Posts: 1,619
Thanks everyone for your comments. I will replaced the galvanized metal to avoid the zinc issue.

As for re-phospohoring and aluminzing, we have the equipment to do that coming from RACS later this year. We also have a person who visited RACS for two weeks and learned the process. At some point we will deal with the issues of getting this equipment converted to operate on US power standards and with the environmental issues.

The vast majority of the dud tubes out there are still under vacuum, so the existing phosphor is most likely OK.

Bent guns are not available now - we plan to replace the heater and cathode in existing guns.

Last edited by Steve McVoy; 10-04-2014 at 06:03 AM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:56 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.