Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 10-03-2014, 06:34 AM
timmy's Avatar
timmy timmy is offline
VideoKarma Member
 
Join Date: Jan 2011
Location: Delaware ny
Posts: 3,719
ok thanks
well i came up with this diode weather or not its true but i found that this diode is supposed to be a 200 volt 1 amp. problem is the sub diode i put in had a 400v 3amp 150ns rating but it left me with a intermittent dark line on the lower left screen. so i changed the diode to a 200v 3amp 35ns diode and the dark line is 95% gone but shows up very small from time to time. so if infact the right diode that goes in has to be a 200v 1amp thats ok but i am wondering what the recovery time is in, ns . the diode that had came out had blue lettering and i had researched it but never found a thing on it so there may be special characteristics to this diode even though its not marked with an X to indicate anything special. if memory serves when this diode first went bad i think i tried a 600v 1amp general purpose diode and it burned , maybe the recovery time was not consistent with what the set needs.

Last edited by timmy; 10-03-2014 at 07:32 AM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:03 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.