Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #30  
Old 10-01-2014, 09:17 PM
old_coot88 old_coot88 is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 2,654
WD,
You should definitely get the AC heater voltage down a few volts on the 35Z4. Try a resistor in series with the dropper cap. Maybe start with a 22 ohm and see which way it needs to go. (Make it 2 watt or higher rating.) Heating won't be much of an issue.

The 1V DC tube filaments want to see no higher than 50 ma. So the DC filament dropper should be delivering 50 ma. to the string. Since it's series, always go by the current, not voltage per se.

The video won't play on my rig (iPad). But what you describe sounds like 'tunable hum'. That's when the received signal is getting 'modulated' at the powerline rate. It can be caused by a coupla things..

1. An open antenna coil causing the converter tube's grid to 'float', thus making it hypersensetive to ambient powerline fields.

2. The received signal being re-radiated by house wiring, usually due to power diodes in some piece of equipment switching the re-radiated signal on and off.
Try disconnecting (not just turning off) all appliances and electronic gear one-by-one and see if the problem clears.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:21 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.