Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 09-19-2014, 09:48 AM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,815
Quote:
Originally Posted by Tomcomm View Post
Did RCA ever go back to wb IQ video processing? ….
In the 80s, RCA produced a chassis with I/Q decoding. They developed a circuit that could drive a delay line and sense its output with one analog IC pin and one external transistor, one of my favorite patents of all time.

I had a project at Zenith to investigate possible wideband chroma, and unfortunately found that a combination of circumstances made it impractical (list below). Of course, we did a competitive analysis of the RCA, and found that the I high frequency response was rolled off severely, which I think was probably due to them discovering the same problems I did in my project:

1) The IF amp designs were "haystack" shaped rather than attempting the flat top response in very early color sets. This was for a combination of reasons; lower cost, better transient response when used with a simple analog sharpness control, less sensitive to fine tuning error. But it meant that chroma sidebands were on a slope that had to be compensated in the chroma take-off / bandpass circuits.

2) The original NTSC Q filter specs in the color encoder were not strictly enough specified. Many encoders had sufficient Q sidebands that non-symmetrical upper and lower sidebands would be present due to the sound carrier notch in the transmitter and especially in the receiver. This produced quadrature color distortion on edges - could be OK for some things, but when the edges of faces get wrong color, that's a deal breaker. If only the original NTSC gurus had thought to specify a 920 kHz null in the Q baseband filter, both Q sidebands would have been suppressed, and the I/Q unequal bandwidth would have been guaranteed to work as advertised.

I went through a complete series of experiments, from full wideband RGB to composite baseband with wideband equiband chroma; to composite baseband with double-sideband wide I and narrow Q using a commercial encoder; to the same over RF (where it got bad); to an encoder with a redesigned Q filter over RF (edges fixed). When I say edges fixed, I mean edges of faces were OK; but we could find some objects that showed distortion. For example, a thin yellow box surrounding titles on one test slide turned orange on the vertical strokes, because only the I component had significant amplitude on the thin line. Yellow title letters were not so bad because they were usually thick enough to get some Q response; but you could see some effect.

Speculation on why the original NTSC specs didn't have the notch specified:
1) effects weren't easily visible on small screen
2) analysis of some original schematics indicates there could be an inadvertent notch (or at least strong high frequency attenuation) in the Q path depending on the mutual coupling in the phase-equalized filter design; but this was never specifically required in the NTSC specs.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:18 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.