Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 09-15-2014, 11:19 PM
Phil Nelson's Avatar
Phil Nelson Phil Nelson is offline
VideoKarma Member
 
Join Date: Jan 2006
Posts: 4,030
Looking good! Persistence pays off.

Incidentally, I see a big orange selenium rectifier in your final photo. These can fail, and when they do, they make a horrid stink.

You may hear different opinions about replacing these rectifiers.

Some people say, leave 'em in and see what happens.

Other people replace them with a type 1N4007 silicon diode (costs less than a buck). If you do that, take the old rectifier completely out of the circuit; don't wire the diode in parallel with it. You can also measure the B+ voltage and add a small power resistor in series with the diode if it is too high.

I don't like reopening projects that I had considered finished, so I usually replace the seleniums. But in a few cases, I have left them alone, and the world didn't end. I believe this is a series-string set and if the rectifier fails, it won't seriously damage other components.

Phil Nelson
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:13 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.