![]() |
|
|
|
#1
|
|||
|
|||
|
Lol, I know better than to use q-tips on such sensitive gear. There are special rubbing pads that are used to clean the heads.
I received the PVW-2800 last week and so far works great. Apparently the unit I have has the Micheal Selman AFM-215 which is mounted on top of the deck which is supposed to be an upgrade to utilize 4 channels of audio. Only issue I noted so far was the VU audio meters doesn't move when I played back a tape. I can hear it through the headphone jack on the 215 but no signal indicated on the meters. Other than that it works fine. Still have more testing to do with it. |
|
#2
|
|||
|
|||
|
Could be a tape with AFM-only audio.
I have heard about, but never seen one of those adaptors. Does it have its own meters, or is there meter-switching somewhere? That makes the 2800 the functional equivalent of a BVW 70/75, depending on slow-mo capabilities. Chip |
|
#3
|
|||
|
|||
|
Yes, it has its own meters. Here's a pic of it:
![]() When I have the switch on LNG the audio comes through pretty good via its headphone jack, just no indication on the meters. Could possibly be the way the tape was recorded too, but will work with it more. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|