Help with Phono - RCA Victor 18t AM Radio

[maxhifi]

Without question it is the tone switch. Check you may want to take it apart and clean the switch and in the process figure it out
http://www.nostalgiaair.org/PagesByM...1/M0014801.pdf

[rodmonster]

Originally Posted by maxhifi

Without question it is the tone switch. Check you may want to take it apart and clean the switch and in the process figure it out
http://www.nostalgiaair.org/PagesByM...1/M0014801.pdf

OK..
So i wonder which mode it has to be in on the right then..
A B C or PB

I will play with it some more...

[rodmonster]

Ok - update.
I did two things.
1. I cleaned out the RCA jack a bit in the back.
2. I found an OLD RCA jack from the 60s... momo analog... and sure enough - that worked.
I did need to use the tone dial - and the radio did keep coming through - until I got the RCA cable in to work - then it over road the radio.
=)
Thanks for the help yall!
=)

[dieseljeep]

Originally Posted by rodmonster

Ok - update.
I did two things.
1. I cleaned out the RCA jack a bit in the back.
2. I found an OLD RCA jack from the 60s... momo analog... and sure enough - that worked.
I did need to use the tone dial - and the radio did keep coming through - until I got the RCA cable in to work - then it over road the radio.
=)
Thanks for the help yall!
=)

I just wonder if RCA changed the phono input in the later runs.
The Riders shows a phono position on the tone switch.