Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #32  
Old 09-01-2014, 11:42 AM
dtvmcdonald's Avatar
dtvmcdonald dtvmcdonald is offline
VideoKarma Member
 
Join Date: Nov 2012
Posts: 1,268
One more niggling problem: horizontal ringing.

That is, ringing in the horizontal sweep waveform. I see it
in a scope waveform with a probe dangling near the yoke.
It looks to be about 175 kHz. This is very clear.

I see it as waviness in a diagonal line pattern across the screen,
barely visible. I see it as bright bars in a black background, barely
visible. I see it as scrunching up or spreading out in the bars
as a scene pans across the screen. This actually is clearer
than on the diagonal bars.

I've tried finding this problem in the archives here and
find two suggestions: replace the damper tube and the
270 pF capacitor in the yoke. I have no mica caps in a high enough
voltage ... would two 130 pF 6 kV ceramics in parallel do? I
don't know if our stock has the 6AU4GT.

Question: are there other things to check, especially ones
I can just "test" to see if they are good?
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:57 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.