Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Flat Panels & Digital Format

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 08-06-2014, 12:56 AM
dr.ido's Avatar
dr.ido dr.ido is offline
VideoKarma Member
 
Join Date: Mar 2005
Location: SE Melbourne, Australia
Posts: 550
When you say the LED backlight comes on are you referring to the panel backlight or the decorative lighting that some models have?

Do you hear a relay clicking?

In earlier Samsung LCDs a corrrupt EEPROM will stop the set from starting up and can cause the standby LED to stay off or on. The EEPROM could be corrupted by a power supply fault. You'd fix the power supply only to find it still wouldn't start up.

The EEPROM can be temporarily bypassed (usually by shorting the data and clk lines for a second or two while applying power) to get the set to start in service mode where the EEPROM can be reset. From memory service mode should be info -> menu -> mute -> power on the remote.

I don't know if this also applies to the model you have though.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:46 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.