![]() |
|
|
|
#1
|
||||
|
||||
|
When you were at Biltmore, you were less than 2 miles (by air) from me. I'm just across the river from the Biltmore Estate in West Asheville.
I got my first TV from a tech that was totally stumped by its problems. Vertical would collapse when it wanted and instantly come back as normal. No rhyme or reason, and did it warm and cold. All I did was re-solder the pins on the sync tube sockets, and the vertical tube sockets. One of these pins was the problem, because it's still with me today, and it's still working, although now, it needs new capacitors.
__________________
Bruce |
|
#2
|
||||
|
||||
|
KE chassis was a WORKHORSE
Welcome to the forum. I like your avatar, it looks like a Silvertone 4569 table model (tombstone table model but with speaker to side) I have that I got from a neighbor when she cleaned out her attic in the 70's
The GE KE chassis and (1970 was KE-II) were the last good tube color chassis GE made. After that came the C1 and L2 which were series string chassis with much of the "extra parts" removed for economy. The performance showed it. Before the KE was the CB, KC and KD, which were more troublesome. My first job (in a TV shop) in the late 70s was for a WWII veteran one-man shop which was once a four-man operation connected with a large furniture and appliance store that sold GE since before time. The store added the Magnavox line in 1976, yet this old-timer despised transistors , and he did a great job of keeping all the tube sets the store ever sold going. It was his retirement plan; when the KE sets' CRT's got too tired, he lost his customer. I was just learning the trade, but I helped him by spotting those bad solder joints and checking transistors, also hard to see.
__________________
"When resistors increase in value, they're worthless" -Dave G Last edited by DavGoodlin; 08-01-2014 at 02:48 PM. Reason: note on Silvertone |
|
#3
|
||||
|
||||
|
Thanks, Dave, for your comments. I wondered if those GEs were well made, considering ours lasted so long. My dad bought it from Butler-Conrad Appliance Co. like he did most everything else. In those days it was a major expense. We had lots of GE stuff at one time: B&W TVs, toaster, 40" stove, fridge, dishwasher, mixer.
The toaster (1965), stove and fridge (1953) are still in operation. We don't practice appliance genocide. I remember the GE I gutted in 1979 was still working OK, which made me sad even as a kid in community college. But I got free parts, so I wasn't sad for long. I remember someone else took the picture tube. So at least the parts went to a good home. My first and last TV repair job in the summer of 1980 was in a furniture store that sold used TVs on time payments. It had been a while since the last TV guy was there and he had a huge backlog of console sets that had been traded in. My favorite was the Motorola "works in a drawer" set. I had never seen such an animal. It was all solid state too. He even had several roundie color sets, but I didn't work on them because they were much older and not popular. Oh, if I only had them today. My least favorite was a Magnavox tube-model console with little baby mouse feet sticking out of the IF shield. I passed on that one. My most successful was a later model Magnavox credenza from about 1975, all solid state. It just needed a picture tube. It had a gorgeous cabinet and sold the first day he put it on the floor.My Avatar Silvertone wasn't working when I got it. It had a power resistor that was obviously blown, so I replaced that and was rewarded with a working radio. It should be recapped, I know, but it's so original and I play it so seldom that I've left it as is. It doesn't have any hum at all. Those Silvertone consoles are smaller than average. Mine fits in a small bit of wall between the pantry and garage doors in my kitchen. I attached a picture of the entire radio. The dial is its best feature. I had a 1936 Sears catalog with it pictured years before I got the radio, which I think was about $5 at an auction sale. They looked so much bigger in the catalogs that I didn't make the connection until a while after I got the radio. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|