![]() |
|
|
|
#1
|
||||
|
||||
|
Hey those orange things with the fins are pretty neat looking.....
You gunna keep them the original color.....?
__________________
Yes you can call me "Squirrel boy" |
|
#2
|
||||
|
||||
|
Quote:
some day sells along with the TV. They will be replaced with modern parts, completely different looking, painted that color. If you are unfamiliar with these sets, they are inside the perforated metal cage at left in the chassis top photo, and are essentially invisible if you look inside the set with the back removed. The top lifts off this set and they are visible, inside the cage, with the top off. Oh! I have another idea: series dropping power resistors have to be added in series with silicon rectifiers. I could use resistors intended to be mounted on heat sinks, and paint the heat sinks that color. The originals are 3 inches square. These could be as wide but only 3/4 inch or so high, leaving room for the caps I will put there. I'm feeling much better now about the original look! Ideas like that last one are why I am seriously over-planning this project. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|