Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Expeditions & Passions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 07-11-2014, 09:35 AM
dtvmcdonald's Avatar
dtvmcdonald dtvmcdonald is offline
VideoKarma Member
 
Join Date: Nov 2012
Posts: 1,268
For amplifiers I recommend a GaAsFet one from
http://www.advancedreceiver.com/page12.html
and get one tuned to your worst case channel. The noise
figure of these is 0.5 dB!! They also make broadband ones but the
noise figure is 2.5dB. That can make a difference. These do need
a separate wire for the DC feed and a weatherproof box. Their overload
capacity is stupendous.

As for antennas ... I was trying to get a channel 44 which is 68 miles
away over a tiny hill. What worked best was a home-made cut to channel
24 element Yagi, scaled from a design found in a 1977 ARRL handbook,
make 100% out of copper tubing soldered together. This was at a height
or only 20 feet. Such antennas are 6 channels wide. I added an extra
reflector behind it cut to channel 19 and that made it work fine
for local channels 17-23 (of course at low gain, the reflector just removes
the back response).
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:35 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.