Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #12  
Old 06-26-2014, 07:59 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
I used to work for RCA at the Smirnoff Labs, and around the early 80's CTC101 sets had the infamous integrated flyback problem. Seems the problem was that the very high voltage winding was split into 6 sections, and diodes were supposed to go between each section, but someone cheaped out and only used 3 diodes and pairs of windings were joined together. This made for higher AC voltage at each diode, diodes were fine, but they used sharp edged stakes as terminals to connect the winding wire and diode leads. This made for excessive corona. And the epoxy eventually failed, shorting the flyback and taking out the horiz output transistor. Was a warranty disaster.
__________________
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:41 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.