Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 06-25-2014, 09:18 AM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by DaveWM View Post
IHMO the best way to discharge a CRT is with a HV probe. You need one often enough in workign on sets to warrant buying one. Once you have it you can use it to verify the CRT charge status. they are designed to be insulated properly against high voltage. Touch the bell with the HV prob (with the ground attached) and check the voltage or any residual charge. Leave it attached for a min or two as the charge can recover.

With a metal bell crt the CRT does not have the same built in capacitance (internal dag glass bell external dag). But the bell may be attached to an anode lead with a door knob cap in the HV cage OR the the metal bell may have a plastic shell that has a conductive coating on the outside again forming a cap.
According to the Sams, it has a 500PF door knob cap.
I hated those CRT's with a passion! Most were easy to install, but hard to substitute.
BTW, they were invented, by an engineer at a Milwaukee metal spinning concern. The round ones are easy to see, how they were formed, but the rectangular ones???
Must have been several operations.
Reply With Quote
  #2  
Old 06-25-2014, 01:40 PM
VintagePC's Avatar
VintagePC VintagePC is offline
Tube bug got me 05/2010
 
Join Date: May 2010
Posts: 535
Quote:
Originally Posted by dieseljeep View Post
According to the Sams, it has a 500PF door knob cap.
I hated those CRT's with a passion! Most were easy to install, but hard to substitute.
BTW, they were invented, by an engineer at a Milwaukee metal spinning concern. The round ones are easy to see, how they were formed, but the rectangular ones???
Must have been several operations.
Were there rectangular metal CRTs? yikes, that must have been pretty thick metal to withstand the vacuum pressure since it doesn't have the same natural strength...
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:18 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.