Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #15  
Old 06-24-2014, 09:31 PM
earlyfilm's Avatar
earlyfilm earlyfilm is offline
Eternal Member
 
Join Date: Jun 2011
Location: Culpeper, VA
Posts: 527
Quote:
Originally Posted by Kamakiri View Post
Another thing that's interesting to note is that Buffalo didn't get television until mid-1948. Since the stations on the pushbuttons indicate that this set is native to the area, it must have been purchased long before there was anything to watch, and from out of the area (presumably).
Tim, In your initial post, you just answered your own question:

Quote:
Originally Posted by Kamakiri View Post
"....immense theater.....6th floor..."
For you youngsters who grew up in the cable TV age, in the early antenna TV era, the height matters and long feed wires sucked up the signal before it got to the TV, so you wanted the TV near the highest possible antenna! With almost no TV stations on the air DXing was not only possible, it was fun!

Back when your set was new, most interference came from pre-1930's light bulbs still in service and from any thing with motors that used brushes. When I was young, you could count the Fords driving by, just by watching the flickering thin black streaks on Howdy Doody, but at the same time from our hill 80 miles north of Memphis, we often could pickup Mexico City during the summer like it was a local channel!

I'll wager a plug nickel that the owner of this TV was whoever, in 1947, had an office on the top floor of that theater, most probably the manager of this theater or the building owner. This 1947 TV cost more than a new Chevrolet at the time, so he was well heeled!

Hmmm. I wonder which could pull in the weakest signal, this Du Mont or the same age RCA 630TS.

It'll be close, but my vote is for four video IF RCA on 300Ω twin-line over the five video IF Du Mont on 72/75Ω coax, but the coax will reduce a lot of the stray noise that plagued us back then. Now, if one had modern coax, it should beat the 1947 vintage stuff. It looks like your set owner used twin lead with a primitive matching transformer.

You wrote: "I also have what appear to be the engineering blueprints of the schematic of the set. Each foldout diagram is a couple feet in length, at least."

Are these actually blue prints (dark cyan, and not prone to fading, unless in the immediate presence of sulphur where they turn brown, as in contact with rubber bands) or Mimeographed (Dark blue-purple when new and fade to pink over the years)? If these differ from the copies on ETF, it might be nice to take good photographs of them.

I was surprised to find that the original uncrating instructions that came with my RA105 was Mimeographed instead of printed and it is now has almost completely faded out.

First, congratulations for saving the set, but am sorry that you had to sell it.

It will be a real fun toy for your potential buyer! With a pristine RA-105 Colony (newest tube is one 1956 5U4) sitting in my living room waiting for restoration, I'm completely out of the market for big antique TVs in the foreseeable future. I'm not allowed to touch it until I get my to do list done.

James.

Last edited by earlyfilm; 06-24-2014 at 09:47 PM.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:40 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.