Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #24  
Old 06-17-2014, 11:43 PM
Phil Nelson's Avatar
Phil Nelson Phil Nelson is offline
VideoKarma Member
 
Join Date: Jan 2006
Posts: 4,030
Replacing them with modern caps of the same values will give you better reliability because modern caps are greatly superior to those made 60 years ago. This article has lots of information about choosing replacement capacitors:

http://antiqueradio.org/recap.htm

I normally choose replacement caps with the same capacitance values and voltage ratings as the originals. There is no real advantage to using caps with a higher voltage rating than the originals. Higher-voltage caps will be larger and they will cost more, but otherwise your TV will perform the same either way.

Some folks make sure that new electrolytic caps have a good maximum temperature rating -- say, 105 C or higher.

Phil Nelson
Phil's Old Radios
http://antiqueradio.org/index.html
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:05 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.