![]() |
|
|
|
#1
|
||||
|
||||
|
Quote:
Anyway, I think (HOPE) that I have a sub for that rectifier in my much too large collection of tubes. I started a thread in the classifieds looking for a HV probe/meter so I can properly set the HV. So far only one person has responded and he has something that I can connect to my Simpson analog VOM, but it maxes out at 25Kv which is (I think) where the HV should be. If it is indeed 25Kv, then I could use the instrument, but would need to be careful not to peg my meter if the voltage were too high. Just turn it down and work up sounds like a plan.
__________________
"Face piles of trials with smiles, for it riles them to believe that you perceive the web they weave, and keep on thinking free" |
|
#2
|
|||
|
|||
|
Even if goes to 30KV, it ain't gonna prang the meter movement any moreso than turning the R zero adjust overscale.
|
|
#3
|
||||
|
||||
|
MAJOR score today. I went to the only place left around here that ever repaired TVs. The owner sold me a B&K HV probe for $35. Also, they still have a room full of tubes, so I grabbed a horizontal output tube and a HV rectifier for beans. I haven't had time to try the stuff, but my HO tube showed shorts on my Hickok 6000A. Perhaps that is the cause of these issues. I will know soon. Very happy with the finds!
__________________
"Face piles of trials with smiles, for it riles them to believe that you perceive the web they weave, and keep on thinking free" |
![]() |
| Thread Tools | |
| Display Modes | |
|
|