Quote:
Originally Posted by Username1
Yah, without connecting the tube, the HV lead most likely will not be accurate.
You need to do a current check, then you need to check Horiz output tube cathode current.
And be sure the other elements are ok, Regulator tube, rectifier, B+, b Boost, Focus, Horiz
yoke circuit.....
|
did all of this, cathode currant is at 190 and it can swing up or down. reg tube and others, whats odd is on the side of this blue i am having problems with centering on that side. focus volts seem to be ok at about 4500kv sams shows.
05-19-2014, 05:54 PM
Threaded Mode