Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 05-06-2014, 09:52 AM
kvflyer kvflyer is offline
VideoKarma Member
 
Join Date: Nov 2006
Location: Fernandina Beach, FL
Posts: 1,132
I apologize if I am preaching to the choir here. But, as with other equipment, it will work much better with at least the capacitors replaced in it. I only has a few capacitors, two 8 uFD filters and the odd ball is the 2uFD paper capacitor. That should be replaced with film capacitors. I have about three of four of these and when the parts were replaced, it reads very close to the value. There are resistors around the selector switch and often the first one (or others) drift high. That will most likely throw the readings off. I test the resistors and if they are high, they get replaced with all of the paper and electrolytic capacitors.

Do you have the manual for it?
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:31 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.