Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 04-12-2014, 10:25 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Usually, there is a low ohms resistor in the filament line to the CRT and these resistors can open. It would be best if you had an HV probe to see exactly what's getting to the CRT anode.

If I'm not mistaken, these Zenith's with the switching power supply can lose horizontal sweep and still have audio because the voltages for the signal and audio circuits are taken off the switching power supply transformer, not the flyback. I think the only voltages provided by the flyback are for the vertical output circuit, HV, focus voltage, filament voltage, and B+ voltage for the video output stage. If the horizontal circuit is not operating, you won't have any of these voltages.

Since you have 188V at the CRT socket, I'm betting the sweep circuit is working and you have an issue in the filament circuit.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:08 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.