![]() |
|
#7
|
|||
|
|||
|
The difficulty arises when you want one instrument to test all capacitors. You measure capacitance, leakage, ESR, self resonant frequency, voltage and temperature coefficient to name the more important ones.
Of course, measuring 'enough' to determine suitability in a television receiver is another thing. Certainly capacitance tolerance is generally unimportant, so you don't need a precision bridge. Even leakage is usually of no consequence except perhaps as a warning of impending failure. The high voltage units are probably not worth testing as regards their voltage breakdown, as they are usually either good or bad in that respect. I have a few devices I use. The main one is the GR 1658 Digibridge, a very accurate unit that measures capacitance, inductance, and resistance (including ESR) at two frequencies. But no stress testing. I also have a GR 1650A analog unit that is nice because it will measure resistors at DC, which the Digibridge won't. I have another GR unit, a megohm bridge, that will test components up to 1000 V DC and measures very high resistances. My answer to your question is that I have no answer. We need to understand why we are doing this, and obtain appropriate instrumentation to realize the testing we desire. |
| Thread Tools | |
| Display Modes | |
|
|