Yet another Predicta Holiday restoration

[bonanzaman]

Originally Posted by Phil Nelson

BTW, the Philco factory service manuals for the Predictas have very nice diagrams with labels, so you don't need to draw your own board diagram as I did once upon a time. You occasionally see an original manual for sale on eBay. There is also a guy who sells the complete Predicta set on CD.

Another advantage of using the Philco manuals is that the little numbers on the boards match the Philco part numbers in the manuals.

Phil Nelson
Phil's Old Radios
http://antiqueradio.org/index.html

And thanks, Phil, for posting the factory board diagram on your website...That will be most useful I know Bob has addressed this, but every time I look at that setup, I can't help but wonder if there isn't some kind of connector that could be soldered & shrinkwrapped to the ends of the board connect wires that could then be plugged/unplugged directly to the board studs...like a loose octal socket female pin?......something that would make good contact