![]() |
|
|
|
#1
|
||||
|
||||
|
Yes, it's bonded like other safety glasses I have seen. If it was originally clear, maybe I'll replace it. This color isn't very appealing.
Any ideas about the linearity issue? Phil Nelson |
|
#2
|
|||
|
|||
|
Horizontal linearity could be...
Problems with these .1 across L21 120mmf across Damper tube 12ax4gt 47mmf across 1/2 of Horiz Yoke winding the 12ax4gt itself... I would guess you already tested such... Try about a 75mmf across the damper tube to see if there is an improvement. Have a nice afternoon... rrrhre2s |
|
#3
|
||||
|
||||
|
Thanks for the ideas. My set does not have the .1 cap across L21. Maybe that's why they show the coil and cap inside dotted lines. I could try adding that to see what happens. The other caps are easy to reach except for C73 (47pf), which is crammed in the yoke.
Phil Nelson |
![]() |
| Thread Tools | |
| Display Modes | |
|
|