Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 03-12-2014, 09:52 PM
cluelessgame cluelessgame is offline
VideoKarma Member
 
Join Date: Apr 2011
Location: Knoxville, TN
Posts: 66
Quote:
Originally Posted by Zenith26kc20 View Post
crazy to say it, check the horizontal blanking diode.
will do, just curious tho, what makes you think that?
Reply With Quote
  #2  
Old 03-13-2014, 08:40 AM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
Quote:
Originally Posted by cluelessgame View Post
will do, just curious tho, what makes you think that?
Second that, losing half the screen horz would tend to indicate a problem that is blanking at the horz rate. Most BW sets do not even have horz blanking (well older sets anyway) the just rely on the sync pulse to cut off the CRT. this is where a scope would come in handy as you could examine the signals at the CRT to see where the defect is. I am sure its the pin 3.

would like to add that I would replace all the caps in the boost filter supply, and also check resistors and replace caps in the horz blanking.

As too why the spot, that's a tough one. fix the blanking then try running it for an extended time (like 10 min) see if turning it off then still gives the dot.

I have a set that if I turn it on for just a short time (like right after the raster comes up) then turn off the spot is there, very bright very long. But if I watch for any length of time its not a issue.

I recall reading somewhere that a weak tube can do this as well but not sure about that, I do have a tube (27ZP4) that did this. it was weak takes a few min to come up to decent brightness. The spot bothered me on that one so much I made up a little cap/diode/bleeder resistor in the brightness circuit that would cut off the tube by discharging the cap into the cathode with a pos voltage when the set was turned off (think that was it, its been a while).

Last edited by DaveWM; 03-13-2014 at 09:02 AM.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:21 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.