Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 03-04-2014, 11:45 AM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by DaveWM View Post
there was a .47 on the board on the CRT that supplies the G2, it was a 500v. not having a good way to test at that voltage I just replaced it with a 630v film .47 cap. no change.

my play is to scope the K's of the CRT and see if there is something going on there. I want to isolate the fault to either the kine bias,sweep or HV. I think its the kine bias as there is no distortion in the image that shows thru. I hope scoping the pins of the crt will show the defect at the horz rate.
The screen electrolytics are generally around 4.7 to 10mfd.
That was my first Sony color set. I got it used in the mid-70's. There was no set, that could compare, color and picture-wise.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:23 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.