![]() |
|
|
|
#1
|
|||
|
|||
|
B&K Television Analyst
Sage advice. I'll certainly be sure to do that. Would a variac type transformer be appropriate, or would it be better to get something like a Sencore PR57?
|
|
#2
|
|||
|
|||
|
sencore is great, but all you really need is a isolation transformer. Most variac's are autoformer type which do NOT provide isolation.
If you get an isolation transformer make sure its up to the task, I am not sure how they rate them, but figure you want something that can handle 4amps that should cover pretty much anything that you may ever come acrosss. I have looked at the sencores PR57's they look nice but are not cheap. My rig is a homebrew with a isolation trans that is connected to a variac, with AC volt and AC amp meters so you can monitor both volts and amps while adjusting the voltage. |
|
#3
|
||||
|
||||
|
This may have been covered elsewhere, but what exactly are the differences between the 1077 and 1077B?
__________________
I don't know anything about ignorance and I could care less about apathy. www.galaxymoonbeamnightsite.com |
|
#4
|
|||
|
|||
|
the 1077B is a later version, has solid state sweep on it. You can probably get a great deal on ebay for a sencore Va62. Also, I have sencore equipt for sale. Pr57, RCA isolation transformers, etc. I am on the verge of donating all this equipt and taking a tax credit. I have to clean out the shop. I just don't want the hassle of packing stuff up. I also have microfishe readers...and the BIG one at that along with Zenith, RCA, And NAP service literature on fishe for TV's and VCRS.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|