Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 02-06-2014, 05:31 PM
egrand
Guest
 
Posts: n/a
I remember a 60's Amana was on the bay 2-3 years ago that was either never used or barely used. IIRC you would have to have owned Ft. Knox to pay their asking price.

I had an aunt and uncle that had a late 60's Sears one built in over the stove. That was the first one I ever saw.
Reply With Quote
  #2  
Old 02-07-2014, 06:23 PM
Phototone Phototone is offline
VideoKarma Member
 
Join Date: Mar 2010
Posts: 89
Back in the late 1970's or very early 1980's one could buy a Microwave leakage meter you held near and around a given microwave oven to check for leakage of microwaves. I would think one could determine safety by using one of these. May still be available.
Reply With Quote
  #3  
Old 02-07-2014, 10:15 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
The first attempt at cooking food using radio waves (not microwaves) goes back to the 1930s. The unit was called the "Radio Sandwich Machine" (RSM); there is a thread here on VK describing this unit, which was an early forerunner of today's smaller and much more efficient microwave ovens. The RSM used four radio transmitting tubes, a separate power supply, and was used mostly at exhibitions, the most notable of which was the New York World's Fair in 1939. Most of these machines were eventually seized by the government and destroyed, probably because of the high level of RF radiation (there were few or no standards for RF leakage at the time). One of the few (and I do mean few) such machines still in existence was on eBay some time ago; whether it sold or not, and if so to whom, I don't know.

BTW, I shudder to think of the arcs a machine like the RSM could generate if someone were to operate it without food in the long chamber atop the cabinet, or with anything metal in there as well. Today's microwaves will smoke and catch fire if abused in this manner; I imagine the RSM would set an entire kitchen afire in two seconds (!) under the same conditions, since the four tubes in the unit probably generated 500+ watts of RF energy. I would think that under such a severe overload, the house fuses would blow in an instant, but with 500-plus watts of RF sparking inside the oven, the thing would probably catch fire long before the fuses let go.
Attached Images
File Type: jpg Radio Sandwich Machine 1930s.JPG (20.5 KB, 69 views)
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.

Last edited by Jeffhs; 02-07-2014 at 10:49 PM.
Reply With Quote
  #4  
Old 02-08-2014, 09:48 PM
zenith2134's Avatar
zenith2134 zenith2134 is offline
VideoKarma Member
 
Join Date: Feb 2005
Location: UTC -4
Posts: 2,546
There is a late sixties Litton tabletop microwave oven in my garage. It came from an estate sale's trashpile. It is in fantastic cosmetic condition, and works well (I tested it to boil a glass of water and it did; even the lightbulb still worked). I would never use it in any kitchen, but it is too good to just discard...It has more metal and weight to it than any TV of its day IMO.
Made in USA.
Other than that, i still have my grandparents 1970s Sanyo microwave. Sentimental item, complete with 'Microwave Cooking' handbook.. kind of morose how it lists Whole Turkey as a microwavable item(!!)
I don't have a microwave oven in my own kitchen.
Reply With Quote
  #5  
Old 02-09-2014, 11:01 AM
Countryford's Avatar
Countryford Countryford is offline
VideoKarma Member
 
Join Date: Sep 2013
Location: Phoenix, AZ
Posts: 260
Here is a craigslist ad for appliances from the late 50's. It has the cook top stove, wall oven, vent hoods, and a microwave (looks close to the other wall oven). On the main picture it is the one on the left.
A buddy of mine in the area called and was arranging to pick up the appliances when the person called back and said that the contractors accidently threw away the appliances. However the ad is still listed on craigslist. Here is the ad.
http://detroit.craigslist.org/okl/app/4308335825.html

And here is a close-up pic of the microwave.
Reply With Quote
Audiokarma
  #6  
Old 09-20-2015, 05:52 PM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,857
Quote:
Originally Posted by zenith2134 View Post
There is a late sixties Litton tabletop microwave oven in my garage. It came from an estate sale's trashpile. It is in fantastic cosmetic condition, and works well (I tested it to boil a glass of water and it did; even the lightbulb still worked). I would never use it in any kitchen, but it is too good to just discard...It has more metal and weight to it than any TV of its day IMO.
Made in USA.
Other than that, i still have my grandparents 1970s Sanyo microwave. Sentimental item, complete with 'Microwave Cooking' handbook.. kind of morose how it lists Whole Turkey as a microwavable item(!!)
I don't have a microwave oven in my own kitchen.
Does it have the torx tamper-proof screws? I fixed one for an ex-GF in the early 90s, and had to go to an industrial supply house to buy a driver bit to remove the cover. The HV rectifier stack was fried and I got one from Sears to fix it.
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!
Reply With Quote
  #7  
Old 02-09-2014, 11:26 PM
philtar0079's Avatar
philtar0079 philtar0079 is offline
VideoKarma Member
 
Join Date: Jan 2014
Posts: 80
That's pretty neat. Thanks for the info.
__________________
Looking for a Commodore PET, always wanted one.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:02 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.