Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 01-24-2014, 11:35 PM
old_coot88 old_coot88 is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 2,654
If you seriously do not have a meter, there's a 'quick & dirty' way of dipping the efficiency coil. Connect a #44 bulb (which is rated at 250 ma) in series with either the plate or the cathode. Adjust the eff. coil for minimum brightness. The bulb should glow at signifigantly less than full brightness, indicating the current to be well below 250 ma., and in the "safe" range.

We used to carry a 'magic light bulb' adapter in the tube caddy for this purpose; just clip it in the plate lead of the tube. It was surprizing how many sets in the field were 'off the dip'. In the shop we always used a proper (analog) meter.

There was never any observable correlation between eff. coil setting and linearity.

Red plating of the tube should be avoided at all cost. It can kill the tube quicker than it can kill the flyback due to the tube's small thermal mass. I've seen HO tubes with holes melted thru the glass and the flyback was still good.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:57 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.