Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 01-14-2014, 03:45 AM
kramden66 kramden66 is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: Rockaway, NJ
Posts: 1,421
Well I put a 1n4007 in and it seems ok , also put a replacement for the electrolytic, I did accidently break the tip off the circuit breaker and changed it but the one I put in is rated at 1.75 , the one that was in it was 5amp , will the 1.75 be ok or will it trip ? I calculated the watts divided by volts and got 2.6 , the set is 310 watts , I tried a couple times a start up and it came on ok with the 1.75 , I even tried turning a set on one the same line to see if the momentary surge would cause anything , I almost plugged the vaccum in to see if that surge would do anything but didn't, so will it run and trip after a while because it is too low ?
now to try to get the ma measured on the cathode , get the sound tuned up a little and take some pics to post.

mike

Last edited by kramden66; 01-14-2014 at 03:56 AM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:48 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.