Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 01-12-2014, 06:11 PM
Ed in Tx's Avatar
Ed in Tx Ed in Tx is offline
Zenith Walton My 1st TV
 
Join Date: Nov 2008
Location: DFW
Posts: 1,421
When you have a symptom of a cold start problem where the problem goes away as it warms up, you can track that down to a particular cap with freeze mist. Conversely you can sometimes make a device, power supply etc., work when it won't start or work properly cold by heating the capacitors with a heat gun or hair dryer.

That was my troubleshooting technique until I bought an ESR meter.



This computer I am on now will not start when it gets cold. I found that out when we lost power a month ago for 10 hours and the house got down to 45-50° F. Got out my heat gun, warmed up the puffed up caps, see attached, and got it up and running. Arrow points to one that vented with a little hole in the top. Haven't powered it off since! I have the replacement caps ready to install.
Attached Images
File Type: jpg compaq-bloatedcaps.jpg (77.4 KB, 32 views)
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:20 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.