Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 01-12-2014, 03:36 AM
kramden66 kramden66 is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: Rockaway, NJ
Posts: 1,421
never trust old electrolytics , I was running the set figured I'd finish up with the convergence , the picture shrunk and I shut it off , I was thinking something got in the set and was shorting , nothing , turned it back on , after a minute it shrunk and the breaker popped , I then poked around to see if any wires were messed up , I checked the power rectifiers and one was shot , I then checked the old electrolytic and it was hot , must have taken the power rectifier out , so even 15 minutes later it was warm , so now to replace it and the rectifier.

earlier I tried the cathode and I couldn't get readings on the meter , the set should have produced a picture and it didn't ,I will try again with the 10 amp input of the meter but if that doesn't work I don't have anything to check the cathode.
also checked the anode and it is running about 22k , I will recheck that once I get the set running again , I guess if its 22k and not 23 it will be ok , if it runs under 22k is that harder on anything ?.

mike
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:11 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.