![]() |
|
|
|
#1
|
|||
|
|||
|
...
Last edited by andy; 12-05-2021 at 08:49 PM. |
|
#2
|
|||
|
|||
|
Ok back on the 10he with some voltage updates. I found, and bought the sams! Now the voltages I have checked: 665v boost off pin 3 of the flyback. I'm getting 7.4 ohms across pins 3-6. Checking voltages on the blue, green, red triple pot test point "1" B+ on the sams I have 273v. On test point "42" boost I have .02 volts, so looks like my boost is disappearing. I cut the .1 mfd @ 1000v out of the circuit, and subbed a new one with no change in operation. I also checked voltages on the 11bt11 according to the sams pin 2 should be 80v, I have 89v. Pin 11 -5v, I have -205. Pin 10 125v, I have 145v. I have the tv in direct sunlight, and can see tin whiskers around the pots. I guess taking them apart, and cleaning may help?
|
|
#3
|
|||
|
|||
|
I would suggest you do some continuity checks from the output from the fly to the boost side of the pot. look for continuity from thru the circuit and look for shorts to ground. something does not make since since 0v at point 42 would tend to indicate a short which should kill the boost a the fly (assuming you have continuity from the 0v test point back to the 670v boost point.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|