![]() |
|
#25
|
||||
|
||||
|
The transistor is either the power supply FET or the HOT.
The HOT on most mid 80's up sets have a damper diode E-C & a resistor B-E. 99.9% dead short when they fail. Power FET's can dead short D-S or open. The one board Zeniths had 2 small 'lytics in the PS that caused int dead or dead. The 2 boarders were big sets so almost all were done in home at board level til near the end. For the control board it helps to have one of those 3 foot long xelite 1/4 drivers. I still got mine but you will have to pull it out of my cold dead hands. I will look later today for the manual. 73 Zeno
|
| Audiokarma |
| Thread Tools | |
| Display Modes | |
|
|