Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 12-30-2013, 01:14 PM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by Kevin Kuehn View Post
Pulled the PC boards out and was poking around looking for suspect capacitors. Just for the heck of it I checked the big transistor mounted on the heatsink next to the flyback transformer. Out of circuit it measures 53 ohms in both directions across the base-emitter. That can't be right, can it?



Those things fool you because of the built damper diode. If it was truly shorted, it would read 0 ohms in both directions.
Reply With Quote
  #2  
Old 12-30-2013, 01:31 PM
Kevin Kuehn's Avatar
Kevin Kuehn Kevin Kuehn is offline
Workin' Late Again
 
Join Date: Jan 2011
Location: WI
Posts: 3,976
Quote:
Originally Posted by dieseljeep View Post
Those things fool you because of the built damper diode. If it was truly shorted, it would read 0 ohms in both directions.
Well I was wondering about that too, but this thing shows .034 drop in both directions when my Fluke 75 is in diode check, but it also shows 53 ohms resistance in both directions.
Reply With Quote
  #3  
Old 12-31-2013, 06:32 PM
N2IXK's Avatar
N2IXK N2IXK is offline
Technohippie
 
Join Date: Apr 2011
Location: Sittin' on the "Group W" bench...
Posts: 817
Quote:
Originally Posted by Kevin Kuehn View Post
Well I was wondering about that too, but this thing shows .034 drop in both directions when my Fluke 75 is in diode check, but it also shows 53 ohms resistance in both directions.
Many of the HOTs that contained built-in damper diodes also had a 50-100 ohm internal resistor across the B-E junction. I'm sure this is what you are seeing here.

If it was not blowing fuses and generating HV, the HOT is likely just fine.
Reply With Quote
  #4  
Old 01-16-2014, 09:40 PM
Kevin Kuehn's Avatar
Kevin Kuehn Kevin Kuehn is offline
Workin' Late Again
 
Join Date: Jan 2011
Location: WI
Posts: 3,976
Finally today I got around to replacing 31 leaky capacitors, and it seems to have done wonders. Basically the picture looks very good to me, and no sign of those green retrace lines I recall seeing 12 years ago. The only very minor issue I see is some subtle shading down in the lower right corner. It's hardly noticeable unless there's a solid color on the screen, but then again sometimes it looks fine then too. I can see it best on the two b&w pictures below. I want to thank everyone for helping out with the suggestions on getting this set going.











Reply With Quote
  #5  
Old 01-17-2014, 07:58 AM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
Nice work ! Nothing wrong with that CRT, the purity is
off a little on the bottom right, see if a little magnet on
tape fell off the CRT bell & is laying on the bottom.
Beyond that I would leave well enuf alone.

73 Zeno
Reply With Quote
Audiokarma
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:52 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.