Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #23  
Old 12-29-2013, 08:18 PM
Winky Dink's Avatar
Winky Dink Winky Dink is offline
VideoKarma Member
 
Join Date: Apr 2010
Location: Meridian, Idaho.
Posts: 583
Thank you, Mr. Coot

The full voltage did show up with the 85 removed. I tried the series of shunts, but there was no discernible change in volume. I have pretty good volume already.

The alignment was to two caps each on 1st & 2nd IF transformers, then two caps each on the three RF transformers, then the single "oscillator series."

I checked the link to the schematic, and it seems OK. I'll put it here, anyway for easier reference even though the readability is marginal.



I'm puzzled with the grid voltages--more often than not I get appropriate values, but negative instead of positive or vice versa, and it seems to work fine. On the 42s here, however, the value seems to be way off. But it still works.
__________________
Winky Dink
Damn the patina,
Full speed ahead!
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:22 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.