![]() |
|
|
|
#1
|
||||
|
||||
|
Radio Shack sells one for under $30, settable to channel 3 or 4, that works OK when wired directly to the TV, but I suspect it's not powerful enough to broadcast through your home.
http://www.radioshack.com/product/in...ductId=2103095 |
|
#2
|
||||
|
||||
|
I built one of the Ramsey TV transmitters years ago. It was just awful. I couldn't recommend it to anyone.
A much better solution is a surplus agile modulator, described in this article: http://antiqueradio.org/HomeTVTransmitter.htm Phli Nelson Phil's Old Radios http://antiqueradio.org/index.html |
|
#3
|
||||
|
||||
|
Quote:
Am I correct in presuming that an RF output can be transmitted by connecting an antenna? I have some RF modulators and an RF amplifier laying around. May be time for some experimenting.
|
|
#4
|
||||
|
||||
|
You are correct. In the article that I mentioned earlier, it shows that you connect an antenna to the RF OUT terminal of the agile modulator.
Phil Nelson |
![]() |
| Thread Tools | |
| Display Modes | |
|
|