![]() |
|
#15
|
||||
|
||||
|
You have to disassemble it, remove the worm drive shaft to replace that belt.
I think it's the one have attached. Or similar enough. First I would suggest you take a felt-tipped marker and mark the positions of the gears together in the full up-eject position before you take it apart. I think you can remove just the two screws and the support angle to get to the belt. Last edited by Ed in Tx; 12-24-2013 at 12:40 PM. |
| Audiokarma |
| Thread Tools | |
| Display Modes | |
|
|