Quote:
Originally Posted by cameronflyer
C5 off of pin 7 in V4 of the second IF isn't there looks like it never was , and C26 on pin 6 of V3 the 1st IF is a .1 instead of a .5 as shown on the Sams . If anyone knows why please let me know. The .1 looks like it came from the factory, and the set does run with it that way so who knows.
|
If you check the factory schematic also on the ETF website, you will notice the electrolytic called C-5 by Sams is not present and there are some other changes in the 1st & 2nd IF circuit.
Remember when using two sources, that the component C, R and V numbers probably won't be the same and they are not the same here.
James.
12-19-2013, 12:00 AM
Threaded Mode