Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #18  
Old 12-09-2013, 02:13 PM
rrrhre2s rrrhre2s is offline
VideoKarma Member
 
Join Date: Nov 2013
Posts: 38
I think I am posting about the right set.

Been thinking about your restoration in the...
Predicta "Holiday" restoration p13o?

http://www.youtube.com/watch?v=UlHtGky46r4

at about 16:05 the LED Back light was staying lit for quite a while.

I believe if you connect the high side (ungrounded) lead of the LED to the high side of the filament string it would stop the strange behavior.

My theory is that since LED lighting will stay lit with only 3.2v across them at
a very low current, the capacitor is holding enough charge to cause the LED to stay lit until the charge is depleted.

If you relocate the lead to the (top) of the filament string the resistance of the tubes will drain the charge at that point almost immediately, so the LED will extinguish almost immediately.

The voltage at this point is AC and there is no DC path back to the filter capacitors.

Have a good day...
Love your restoration videos...

rrrhre2s
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:22 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.