![]() |
|
#11
|
||||
|
||||
|
Quote:
No manufacturer was ever able to eliminate moisture as a problem. IRC tried, and got a patent for their "molded" carbon composition resistor process that sealed the outside of the resistor and thus reduced moisture intrusion, but aging and lead flex allowed the moisture intrusion. If it wasn't for economy and pulse/surge capability, carbon composition resistors would have been dead long ago, as most film types suck at handling surges. And no, you can't bake the moisture out - DoD and NASA both tried, but found that the heating process shifted resistance greater than the moisture did. Cheers,
__________________
Brian USN RET 22YRS (Avionics/Cal) CET-Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! Last edited by Findm-Keepm; 11-18-2013 at 10:58 PM. Reason: added "on the shelf" |
| Thread Tools | |
| Display Modes | |
|
|